Ink: a high-contrast toggle switch component in black and white
Ink turns the track near-black and keeps the page and the knob white, so the switch reads at a glance in a light interface, like a classic on and off control. The knob carries its label in black ink while the one that is off sits on the dark track in a mid gray, and on 3D the dark track becomes glass whose bright rim catches the light along its edge.
Make it yours
Hard pixel edges
Set Corners to Square for a track and knob with sharp corners that match the square pixels, or to Stepped to round them off in pixel steps.
Bolder letters
Bring Pixel gap down toward 0 and the dots of 2D and 3D join into solid letters, a heavier label in black on the white knob.
FAQ
Can the Ink switch use my own dark color?
Yes. Pick any color for Track, 2D pixels and 3D cubes in the Colors group. Ink only starts all three at the same near-black, #141414, so the letters on the white knob match the track.
How it works
Pick a look
Start from Soft, Ink, Night, Lime, Blueprint or Object, then choose the side it starts on, the 3D style and a width from 120 to 720 px.
Shape the 3D and the glass
Set the tilt and turn of the 3D view, the cube height, wave and sway, then the frost, refraction, dispersion and reflectivity of the glass. Flip it in the preview as you go.
Take it with you
Sign in with a free UX Pilot account to download a PNG at 1x to 3x, a video or GIF of the flips, the live switch as an HTML page, the JSON settings or its code.